| OLOID Type 200 K DC | OLOID Type 400 K DC | |
| For applications up to | 1,000 m3 | 10,000 m3 |
| Motor | Dunker | Dunker |
| Protection class | IP 65 | IP 65 |
| Electrical connection | 24 V | 24 V |
| Connected power | 158 W | 250 W |
| Net power consumption at 125 rpm (depending on viscosity) | 158 W | 200 W |
| Total weight | 230 kg | 262 kg |
Side view OLOID Type 400 K DC Solar
with solar equipment floating
This page contains only the additional information on solar design and equipment.
All information on the OLOID Type 200 K DC and OLOID Type 400 K DC can be found in the linked websites and the corresponding linked data sheets below.
Solar equipment:
Floating or land
- PV module on carrier profile (aluminium)
- Control cabinet with batteries, charge control, battery protection and wiring
- ON/OFF switch (outside on the control cabinet)
- Fuses within
PV-Module 2x Phaesun PN6P72-320 E:
- System volatge: 24 V
- Rated power: 320 W
- Module efficiency: 16.7 %
Front view OLOID Type 400 K DC Solar
with solar equipment floating
Batteries 2x LiFePO4 Victron 12,8V / 100 Ah:
Alle All information at full load
- Rated voltage: 12.8 V
- Rated capacity at 25 °C (77 °F): 100 Ah
- Nominal energy at 25 °C (77 °F): 1280 Wh
- 2500-5000 charging cycles, depending on depth of discharge
Operating life time:
- Depending on solar radiation
- Alignement
- Up to 18 h/d
Maximum dimensions:
- Width: 2035 mm
- Depth: 2605 mm
- Height: 1894 mm
Further information can be found in the technical data sheets of the OLOID Type 200 / 400 K DC Solar model.
And in our Flyer on solar applications.
Further information can be found in the technical data sheets of the OLOID Type 200 K model.
Further information can be found in the technical data sheets of the OLOID Type 400 K model.